Motor Run Capacitors   Discharge Lamp Capacitors   Fan Capacitors   Ignition Capacitors   Zn-Al Metallized Polypropylene Film   Plastic Case Radial Lead   Tubular Axial Lead   Flat Oval Axial Lead MD-1 Series Capacitors are manufactured with Aluminum Metallized Polyester Film as dielectric in flat configuration. They are wrapped with Polyester adhesive tape and end sealed with epoxy resin. These capacitors are compact in size with Self-Healing properties. Terminationsof tinned copper wire is brought out axially on either side.   Applications Used for coupling, decoupling & smoothening in industrial-electronics and professional equipments.   Specifications Capacitance Range 0.0068 mF to 10.0 mF Capacitance Tolerance +/- 5%, +/- 10% and +/- 20% Rated Voltage - VDC 100 VDC / 250 VDC / 400 VDC / 630 VDC / 1000 VDC Rated Voltage - VAC 63 VAC / 160 VAC / 200 VAC / 220 VAC Test Voltage 1.5 x Rated Voltage Minimum Insulation Resistance at 100 VDC   a) for 100 VDC Capacitor 15,000 MW for C < 0.33 mF Between Terminals 5,000 MW for C > 0.33 mF b) for 250 VDC, 400 VDC & 630 VDC Capacitor 30,000 MW for C < 0.33 mF Between Terminals 10,000 MW for C > 0.33 mF Dissipation Factor (Tan delta) < 1% when measured at 1KHz at 20 deg. C Temperature Range - 40 deg. C to + 85 deg. C Environmental Category 40 / 100 / 56 Capacitance Stability +/- 5% Reference standard JSS 50204 pattern CPM 05   Top of the page ^   Selection Guide Capacitance Value (mF) 100 VDC 250 VDC 400 VDC 630 VDC L H T L H T L H T L H T 0.0068                   14.5 7.0 4.5 0.01             14.5 6.5 4.0 14.5 7.0 4.5 0.015       14.5 6.5 4.0 14.5 7.0 4.0 20.0 8.0 4.5 0.022 14.5 6.5 4.0 14.5 7.5 4.5 20.0 8.5 5.0 20.0 8.0 5.0 0.033 14.5 6.0 3.5 14.5 7.5 4.5 20.0 8.0 4.5 20.0 9.5 6.0 0.047 14.5 6.5 3.5 14.5 8.0 5.0 20.0 9.0 5.0 20.0 10.5 6.5 0.068 14.5 7.0 4.0 20.0 8.0 4.5 20.0 9.5 6.0 20.0 13.5 6.5 0.1 14.5 7.5 4.5 20.0 8.0 5.5 20.0 10.0 7.0 20.0 15.0 8.5 0.15 20.0 8.5 4.5 20.0 9.5 6.5 20.0 13.5 8.0 33.0 13.0 7.0 0.22 20.0 8.5 5.0 20.0 10.5 7.5 20.0 15.0 8.5 33.0 14.5 8.5 0.33 20.0 9.0 6.0 20.0 14.0 7.5 33.0 13.5 7.5 33.0 15.0 10.5 0.47 20.0 10.0 7.0 20.0 15.5 9.0 33.0 14.5 8.5 33.0 20.5 11.0 0.68 20.0 11.5 8.5 33.0 13.5 7.5 33.0 15.5 9.0 33.0 23.5 14.0 1.0 20.0 13.5 10.5 33.0 15.0 9.0 33.0 20.5 11.0 33.0 26.5 17.0 1.5 33.0 11.0 8.0 33.0 16.0 11.5 33.0 24.0 14.5       2.2 33.0 13.0 10.0 33.0 21.0 11.5 33.0 27.5 18.0       3.3 33.0 14.5 11.5 33.0 24.5 15.0             4.7 33.0 18.5 14.0 33.0 27.5 18.0             6.8 33.0 21.0 16.5                   10.0 33.0 27.5 18.0                     Other Capacitance values available on request.   Note : Termination diameters are 0.6 / + 0.06 / - 0.05 / mm for case length of 14.5 mm or less, 0.8 / + 0.08 / -0.05 / mm for case length of 20 mm and 1.0 /+0.1/0.05/ mm for case length of 33mm. Top of the page ^      privacy sitemap .......Copyright © 2005 Stumpp, Schuele & Somappa Pvt. Ltd.